How To Repair Water Damaged Wood Floor
Hardwood flooring is finicky when it comes to water and a simple spill can cause damage to your floor. If flooding has occurred or if a large leak has caused your hardwood flooring to become wet and water damaged, this article will help you repair the flooring properly.
Dry Out the Floor
The first step to repair water damaged floor is to take the time to dry out the floor. This is not going to be an easy task and is one that you will need to dedicate some time to. Hardwood flooring can easily hang on to mold spores and if you do not dry out the floor well enough, mold is sure to form.
The biggest mistake that some people make is that they assume simply wiping up the water is going to do the trick, but it will not, especially if the sublayer of flooring has been soaked with water.
The easiest way for you to dry out the floor is to purchase large fans or industrial sized fans and point them toward the floor. If you have access to air conditioning, make sure that you also turn it on, as it will help dry up any damp areas. Since there is going to be moisture in the air, you need that moisture to go somewhere, therefore, crack your windows near where the floor has been soaked by up to two inches.
If the water seeped past the subfloor layer, you will need to make sure to remove any wet insulation. If the floor that was damaged sits above an area of your home, then you may want to drill a hole in the ceiling of the wet floor to allow any water to escape. Water that is stuck under the boards will not be drawn out with the fan and can create larger problems.
Talk to Your Insurance Company
You need to speak with your insurance company as soon as the problem happens and discuss what the next steps are. Most insurance companies will cover the cost of the damage, but some may not cover it all. In addition, your insurance company may want you to take certain steps when it comes to repairing your hardwood flooring.
Check the Equilibrium Moisture Content (ECM)
You should work with a professional to measure the ECM content of your current, dry hardwood flooring and the boards of the soaked flooring. This number is important because you cannot sand down or replace the flooring until the ECM has returned to normal. The downside to this? It can take weeks, sometimes months for the numbers to even out.
Once the ECM is level, you can have the floor boards sanded down and the flooring replaced in your home. Sometimes, your insurance company will recommend that you replace the entire flooring.
If water damage has been done to your hardwood flooring, you need to make sure you take the right steps to repair it. If you need any help, rely on the professionals at The Floor Shop.